FRONT AXLE (4X4) 19 FRONT AXLE (4X4) C. TONER RING REMOVAL 1. Remove the stone guard. (For procedure refer stone guard removal in Body section.) 2. Remove front wheels. 3. Take out the stub axle assembly along with wheel hub and brake disc.(For procedure refer front axle assembly removal in this section.) 4. Pull out the drive shaft from the carrier section follow the same procedure at other end also. 5. Mount the drive shaft on the table and break the toner ring using a blunt chisel or screw driver. ! CAUTION Do the hammering on the toner ring directly to avoid any damage to the drive shaft and rubber boot. FITMENT 1. Position the toner ring on the drive shaft and with the help of toner ring pressing dolly (Part No. 287058903315) install the toner ring on its location. Proceed in reverse order of removal for fitment of the removed components.
RkJQdWJsaXNoZXIy MTIwNTUz