FRONT AXLE (4X4) 14 4.5.2.2.3 ON VEHICLE REPAIRS A. FRONT AXLE ASSEMBLY REMOVAL 1. Remove the stone guard. (For procedure refer stone guard removal in Body section.) 2. Remove front wheels. 3. Remove split pin and hold the hub assembly with the hub holder (Part No. 287058903316). Secure the hub holder tool on the hub assembly by locking with nuts and loosen drive shaft nut. 4. Lift the vehicle on two post lift. 5. Disconnect the propeller shaft from the front axle assembly. 6. Disconnect the electrical connection from front axle disconnect (FAD). 7. Loosen and remove mounting bolts of front brake caliper assembly with carrier and remove the brake caliper assembly. (For procedure refer Brakes section). NOTE Don’t remove hydraulic brake line connected to Brake caliper assembly.
RkJQdWJsaXNoZXIy MTIwNTUz