REAR SUSPENSION 40 2. Place the guide bush (1) and mount the bush support (2) on the guide bush (1). 3. Place the lower link guide bush housing onto the support (2) and mount the bush over the housing. 4. Mount the bush over the housing. 5. Place the drift (3) above the bush and press it using press machine. NOTE Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation. C. PAN HARD ROD BUSH REMOVAL 1. Remove the Pan Hard Rod bush using special tool assembly (Part No.2870 5890 01 10) as shown in below arrangement. 2. Mount the Pan Hard Rod (2) bush housing on to the support (1)
RkJQdWJsaXNoZXIy MTIwNTUz