REAR SUSPENSION 36 E. REAR SHOCK ABSORBER REMOVAL 1. Hoist the vehicle on two post lift. 2. Support the rear axle from below at both ends. 3. Loosen and remove the lower mounting nut of the rear shock absorber. 4. Loosen and remove two mounting bolts from the top. 5. Tap gently and take out the shock absorber from the lower end to disconnect from the rear axle and remove the Shock absorber. INSPECTION Check the condition of shock absorber for any leakage and damage, if required replace the same with new one. ! CAUTION Only use recommended shock absorber. Fitment of non-genuine shock absorber may lead to the coil spring coming out in dynamic condition especially on rough roads and also during jacking. FITMENT For fitment follow the reverse procedure of removal. Apply the specified torque as per the procedure given in “Rear suspension links tightening procedure”.
RkJQdWJsaXNoZXIy MTIwNTUz