GEAR BOX 17 SHIFTER SHAFTS Shifter shafts can be identified by the distances between two holes on the shafts. B. PRECAUTIONS • Ensure that the oil is completely drained before commencing the dismantling procedure. • Ensure that the engaging gears are properly assembled on shafts over respective circlip. • Ensure that oil seals are free from dust particles and smear grease to dust lip. • Use special tools for removal and fitment of gear box bearings. • Ensure proper fitment of shifter sleeve assembly on synchro-cone and respective shaft. • Ensure no damage done to reverse light switch during handling. • Wherever thread lock gum is used for fasteners, pre-coated fasteners can be used alternatively. Do not reuse pre-coated fasteners.
RkJQdWJsaXNoZXIy MTIwNTUz