CLUTCH 8 SR. NO. DESCRIPTION FASTENER TIGHTENING TORQUE (Kg-m) LOCATION 4 Mounting Screws Concentric Slave Cylinder to clutch housing Hex. FL Screw M6X30 (2 Nos.) (10.9) a. Initially tighten both the screws to torque of 0.5. b. Finally tighten the screws to 1.2 ± 0.18 5 Bleeding valve on Hydraulic Adapter – Hand operated ON/OFF knob 6 Allen screw (1) and Mounting Nut (2) CMC / Bayonet Adapter to control bracket M8 X 50 (1) AM8 (2) 2.5 7 Mounting Bolt (Flywheel to crank shaft) Hex Bolt M10 X 1 (8 Nos.) (10.9) a. Initially tighten the bolt to torque of 3.3 ± 0.3. b. Finally tighten the bolt by 55o ± 5o angle
RkJQdWJsaXNoZXIy MTIwNTUz