HVAC 62 10.3.12 CONDENSER SEALING DUCT REMOVAL 1. Open the bonnet. 2. Remove front bumper (For procedure refer front bumper removal procedure in body section.) 3. Loosen and remove mounting screws and then take out the air guide assembly. 4. Repeat same procedure for other side air guide FITMENT For fitment follow the reverse procedure of removal. 10.3.13. RECEIVER DRIER BOTTLE REMOVAL 1. Remove front bumper (For procedure refer front bumper removal procedure in body section) 2. Loosen and remove two mounting bolts and separate refrigerant lines from drier. ! CAUTION Never leave the RD bottle lines open immediately cover them with caps otherwise the desiccant which in the RD bottle may absorb the moisture from surrounding air and get contaminated. 3. Loosen and remove two mounting bolts of receiver drier holding bracket and take out the receiver drier bottle. FITMENT For fitment follow the reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz