HVAC 54 10.3 ON VEHICLE REPAIRS 10.3.1 CONTROL PANEL ASSEMBLY REMOVAL 1. Refer Centre console removal procedure from body section for removal of center finisher assembly. 2. Disconnect the electrical connections and separate the centre finisher assembly from dashboard.(For procedure refer center finisher removal procedure in Body section) 3. Loosen and remove six mounting screws and separate the HVAC control panel from centre finisher assembly. FITMENT For fitment follow the reverse procedure of removal. 10.3.2 COMPRESSOR REMOVAL 1. Discharge the refrigerant using standard recovering equipment. (Refer maintenance section.) 2. Remove the AC Compressor belt; (refer AC Compressor belt removal procedure in Engine section.) 3. Remove front inner wheel arch liner to access the compressor mounting.(For procedure refer front inner wheel arch liner removal procedure in Body section) 4. Remove front wheel for easy access. 5. Disconnect the Suction line (1) and the discharge line (2). 6. Loosen and remove three mounting bolts and remove Compressor. FITMENT For fitment follow the reverse order of removal. Tighten the following fasteners to the recommended torque. i) Compressor mounting. ii) Refrigerant lines on compressor.
RkJQdWJsaXNoZXIy MTIwNTUz