ENGINE 78 3. Remove the connecting rod . CONNECTING RODS 1. Inspect connecting rod small end bush and if necessary, replace it. 2. Check connecting rod small end parent bore dimension 3. If necessary machine connecting rod small end parent bore to next over size. 4. Ensure that connecting rod big end and small end axis are parallel to each other and are within specified limits. 5. Ensure that the centre distance between small end to big end is maintained within specified limit. 6. Smear oil on parent bore of connecting rod. 7. Install new bush in such a way that holes are symmetrically positioned approximately in the vertical axis. NOTE If required Machine the side faces of bush to match the taper faces of connecting rod.
RkJQdWJsaXNoZXIy MTIwNTUz