BODY 34 REMOVAL 1. Pull out the steering column cover for easy access to connectors of door wiring harness.(door wiring harness connector is mounted next to cabin fuse box.) 2. Disconnect the wiring harness and door electrical connections through the access below steering wheel as shown In figure 3. Remove the door trim. (For procedure refer door trim removal in this section.) 4. Open the door and remove the check strap. 5. Support the door from the below and remove the door hinges 6. Slowly pull out the door and remove the wiring harness carefully which was disconnected earlier. FITMENT For fitment follow the reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz