ENGINE 76 18.Remove the Oil pump and its gasket. 19.Turn the Crankshaft and bring a pair of pistons near BDC position. Unscrew connecting rod bearing cap mounting nuts. 20.Push the piston assemblies out of cylinders using wooden handle of mallet. 21.Remove connecting rod bearing shells and duly mark them with paint on their back in case these are to be reused. 22.Verify serial numbers on connecting rod bearing caps and connecting rods. 23.Remove remaining pistons in a similar manner NOTE: It is essential to assemble connecting rod bearing caps to their respective connecting rods only. 24.Unscrew and remove main bearing-cap mounting bolts. ! CAUTION Mark the bearing cap locations.
RkJQdWJsaXNoZXIy MTIwNTUz