SUPPLEMENTARY RESTRAINT SYSTEM (SRS) 15 SRS LOCATION Front impact sensor is mounted on the radiator support assembly and can be accessed after opening the bonnet from the engine compartment. CONNECTOR PINOUTS PIN NO. PIN DESCRIPTION 1 FEED 2 RETURN SUPPLY VOLTAGE LEVEL Minimum 5.25 V Nominal 6.20 V Maximum 16.5 V B. ON VEHICLE REPAIR !! WARNING The system has back-up power for about 30 seconds after the battery is disconnected. Wait for at least ONE minute after disconnecting the battery before servicing the vehicle to prevent accidental deployment and personal injury. REMOVAL 1. Open the bonnet. 2. Remove the battery connections. 3. Disconnect the electrical connection (1) from the front impact sensor. 4. Loosen and remove the mounting flange bolt (2) and take out the front impact sensor from the vehicle. FITMENT For fitment follow reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz