FRONT SUSPENSION 19 Distance at rear: 50mm NOTE Upper wishbone torque to be given in the above specified condition.(Refer tightening torque table) Before assembly check condition of ball joint, Check excessive play in the ball joint, if excessive wear is found replace the same with new one. Ball Joint Axial Play 0.1 mm max. Ball Joint Radial Play 0.2 mm max. E. BUMP STOPPER REMOVAL Bump stopper is mounted on the frame. Loosen and remove the bump stopper and separate the same from the frame. Follow the same procedure for other stopper also. ASSEMBLY For assembly tighten the stopper assembly on the frame. NOTE Make sure that the specified torque is always maintained. Refer tightening torque table. Check condition of bump stopper for any cracks chipping, wear and tear before fitment.
RkJQdWJsaXNoZXIy MTIwNTUz