TOD 40 4. Install the clutch coil assembly inside the cover and tighten three nuts. NOTE Before assembly, check the clutch coil for its proper functioning by checking the resistance value. The coil resistance should be in the range of 2.375 to 2.625 Ohms at 25º C. 5. Apply 1.6 mm bead of LOCTITE RTV 598HB to the transfer case-mounting surface. For installation of cover, align the cover with transfer case. Do not use excessive force. 6. Install the cover onto the case and tighten 15 bolts positioning identification tag. 7. Install the bracket (3) to the cover along with the “J clip” (2) and tighten two bolts (1). 8. Push the strip of the clutch coil connector upwards and press the coil terminal into the connector. 9. Lock the connector on to the bracket.
RkJQdWJsaXNoZXIy MTIwNTUz