TOD 1 8 TORQUE ON DEMAND 8.1 GENERAL INFORMATION In TOD power is received by input shaft, which is coupled with output shaft of transmission gear box by matching splines. There are two outputs, one for rear wheels and the other for front wheels. A. SPECIFICATIONS CONFIGURATION Torque on Demand, Single Offset REAR OUTPUT CONFIGURATION Fixed Yoke FRONT OUTPUT CONFIGURATION Fixed Yoke INPUT CONFIGURATION Female Spline DROP ANGLE 40° OFFSET HAND Left hand LUBRICATION SYSTEM Force lubrication by Gerotor pump FLUID TYPE SHELL Spirex S3 ATF MD3 HOUSING MATERIAL Aluminum DRY WEIGHT IN KGS 30 Kg (Approximately) FLUID CAPACITY IN LITER 1.2 – 1.4 Ltr SHIFT PATTERN Auto Mode – 4x2 Mode SHIFT CONTROL Automatic (When auto mode is selected) ABBREVIATIONS USED Auto Automatic 4WD Mode Kmph Kilo meter per hour 4WD Four Wheel Drive EMS Engine Management System ATF Automatic Transmission Fluid Nm Newton meter Km Kilometers RTV Room Temperature Vulcanizer TPS Throttle Position Sensor ECU Electronic Control Unit TOD Torque on Demand IC Instrument cluster ABS Anti- lock Braking system CAN Controlled Area Network
RkJQdWJsaXNoZXIy MTIwNTUz