ENGINE 50 C. Cylinder Head : NOTE The mating surfaces of the cylinder head are not machinable. If the surface is warped, uneven or damaged otherwise, replace the cylinder head. 1. Using a straight edge and feeler gauge, check evenness of cylinder head parting surface with crank case. If unevenness exceeds specified values, replace cylinder head. 2. Permissible unevenness of cylinder head mating surface -0.030 mm (Length Wise). 3. Permissible unevenness of cylinder head mating surface -0.015 mm (Cross Wise).
RkJQdWJsaXNoZXIy MTIwNTUz