TRANSMISSION 33 29. Install the cooler lines, and tighten the screw to 2 to 2.5Kgfm. 30. Connect the vehicle connector. See mechatronic removing Procedure. 31. Apply the 3GM of synthetic grease 365 SS6808 TS25205P1 – Part No. 55140860025. 32. Install the propeller shaft on drive flange. 33. Tighten the two drive flange screws to 66.8kgm tightening torque. 34. Using a H9 wrench, turn the selector shaft out of park to allow propeller shaft turning and access to the other drive flange screws. 35. Tighten the 2 support propeller shaft nuts to 8.6kgm tightening torque.
RkJQdWJsaXNoZXIy MTIwNTUz