TRANSMISSION 24 Rear Wheel Drive Transmission Removing Procedure: 1. Place the Vehicle on the hoist, Apply the hand brake. Transmission Selector in Park Position –P Ignition “OFF” 2. Lift the vehicle to access to the transmission. 3. Remove the main transmission protection. 4. Loosen the 2 bolts at the middle and the 3 bolts at the rear of the exhaust system by using a H12 wrench, and remove the middle exhaust system. 5. Loosen the 2 bolts at the front of the catalyst by using a H12 wrench and remove the catalyst. 6. Loosen the screws and remove the vent tube system. 7. Loosen the 3 starter motor screws by using an H14 wrench and remove the starter motor. 8. Turn the crank pulley using a H19 wrench CLOCKWISE ONLY until the first screw is visible in starter hole. 9. Loosen the screw by using a H14 wrench.
RkJQdWJsaXNoZXIy MTIwNTUz