TRANSMISSION 21 6. Push up the plug. NOTE: The seal diameter becomes smaller, so that it is easier to remove the fluid fill tube. 7. Discard the fluid fill tube. 8. Insert the new fluid fill tube on the main case hole. 9. Press the cap plug to fix the plug in the case. Transmission Fluid Level after repairs procedure: NOTE: The vehicle is supposed to be on hoist, lifted, transmission protections removed. 1. Remove the fluid fill tube. See Transmission Fluid Fill Tube Removing & Installing Procedure. 2. Add transmission fluid through the fluid fill hole. NOTE: The approximate amount of fluid needed to fill the transmission, based on the repair performed is: - 6.5 to 7 LITRES for each repair when fluid pan is removed. - 1 LITRE if converter is removed. - 0.85 LITRE if transmission cooling circuit is flushed. 3. Fill the transmission until fluid start to drip out of fluid fill hole. 4. Install the fluid fill tube. See Transmission Fluid Fill Tube Removing & Installing Procedure. 5. Pull vehicle down. 6. Perform the fluid level. See Transmission fluid level checking procedure.
RkJQdWJsaXNoZXIy MTIwNTUz