TRANSMISSION 19 Fluid Drain & Oil Pan Removing Procedure 1. Place Vehicle on Hoist. • Transmission Selector in Park Position –P • Ignition “OFF” 2. Lift vehicle to access Transmission. 3. Remove the main transmission protection. NOTE: The automatic transmission fluid may flow out the oil pan. Put a container under transmission drain hole. 4. Place a suitable drain pan under the transmission. 5. Wait for transmission fluid to reach ambient temperature. 6. Loose the Oil Pan Overfill Plug. 7. Inspect the O-ring seal and plug. If used, discard the plug. 8. If the fluid is flowing as a steady stream, wait until the fluid begins to drip. 9. Loosen the 17 Oil Pan bolts by using a hexagonal M10 wrench. 10. Remove the Oil Pan and the gasket. Important: Inspect fluid pan sealing surface. The gasket is a controlled compression over molded reusable gasket. Oil pan filled with 6Ltr oil.
RkJQdWJsaXNoZXIy MTIwNTUz