GEAR BOX 6450 38 26. Align the main shaft, counter shaft and drive shaft along with respective shifter fork and place this assembly together on intermediate plate. 27. Apply the Grease 3% MOS2 SS6820 and place the gasket over the housing parting surface. Align the dowel pins, place the gearbox housing – Front half over intermediate plate and tap gently with mallet. 28. Lock the intermediate plate and gear box front housing with lock nuts (2 No’s) as shown in figure. 29. Tighten the hexagonal screw of counter shaft bearing lock to the 9 kg-m torque. NOTE: Double locking is done by pushing the 1st / 2nd and 3rd / 4th shifter shaft in upward direction. 30. Place front gear case cover for locking the drive shaft and tighten the nuts temporarily.
RkJQdWJsaXNoZXIy MTIwNTUz