ENGINE 92 E. Injector Removal : 1. Relieve the fuel pressure. (For procedure refer maintenance section in fuel system.) 2. Remove plenum (Wiper plenum) (Refer body group for procedure.) 3. Remove the engine cover by pulling it upwards firmly. 4. Loosen and remove the 3 fasteners and take out the stuffer assembly with foam. 5. Disconnect the injector electrical connecters 6. Disconnect the injector back leak tube (Overflow pipe) and cover the injector side opening with suitable caps. 7. Remove the HP pipes connecting injector to common rail and cover the injector opening with suitable caps. NOTE Once removed HP lines should not be reused. Assemble the new HP Pipes at the time of assembly. 8. Loosen and remove the bolt (1) along with washer and remove the injector claw (2).
RkJQdWJsaXNoZXIy MTIwNTUz