ENGINE 43 vi. Pre-Filter Cum Sedimentor Replacement : 1. Remove Front LH wheel assembly & inner wheel arch cover (For procedures refer body section). 2. Disconnect the sensor pigtail. 3. Keep a suitable container below the sensor to collect the diesel that will drain. 4. Remove the sensor by unscrewing it in anticlockwise direction. 5. Disconnect the inlet and outlet fuels lines as indicated in the figure below. 6. Press the vertical snap fit lug and push up the sedimentor assembly. NOTE Fuel filter bottle and bracket can be separately replaced or the whole assembly fuel filter with bracket can be replaced. WARNING The sedimentor may still contain diesel in it, which may get accidentally spilled onto the operator if it is not handled properly. Fitment : For fitment follow the reverse order of removal. Using hand priming pump refill the fuel lines.
RkJQdWJsaXNoZXIy MTIwNTUz