ENGINE 180 INSPECTION Check the resistance 1.7K ohm +/- 0.8 between terminals 1 & 5 1.2K ohm +/- 0.5 between terminals 2 & 3 REFITMENT 1. Locate accelerator pedal module and fit 4 mounting nuts. 2. Connect the accelerator pedal electrical connector (1) to the accelerator pedal module. 12. BRAKE SWITCH The brake pedal is fitted with two Brake switches, which provide the information to ECU about the brake pedal application. Upper brake switch give signal to EMS ECU for cruise control functionality. Lower brake switch give signal to tail lamp& ABS/ESP ECU. NOTE Brake switch for cruise control is fitted only if the vehicle is having cruise control feature. LOCATION Brake switches are fitted on brake light switch mounting bracket.
RkJQdWJsaXNoZXIy MTIwNTUz