ENGINE 168 ANTI-CRANKING FUNCTION: - The anti-cranking function is an additional function of EMS ECU. Anti-cranking function provides the following safety conditions: - 1. Automatic disengagement of starter motor once the engine is started to avoid overrunning of starter motor 2. Not allowing starter motor to engage when engine is running 3. No starter motor function when vehicle is in running condition. 4. Not allowing starter motor to crank the engine under low battery condition (below 6.5V) to avoid further draining of battery. LOCATION It is fitted in Engine compartment on battery bottom support, besides the battery. TIGHTENING TORQUE TABLE DESCRIPTION TORQUE Hex Bolt M6 x10 0.95 Kgfm REMOVAL 1.Open the bonnet and disconnect the battery negative terminal. 2.Remove ECU rubber cover. 3.Disconnect the both connectors of EMS. (Remove EMS wiring harness connector first then main wiring harness connector). 3. Remove the mounting screws and take out the ECU. FITMENT 1. Locate the ECU on mounting brackets and fit the four mounting bolts. Tightening torque for Bolts - 0.95 Kgfm. 2. Connect the electrical connections (Main W/H and EMS W/H). 3. Connect the battery negative terminal & close the bonnet.
RkJQdWJsaXNoZXIy MTIwNTUz