HVAC 63 17.Loosen and remove thee mounting bolts and separate the “C” pillar duct (RHS) from “D” pillar duct (RHS) which is connected above the rear AC. 18.Loosen and remove the mounting bolt and remove the “D” pillar duct (RHS). 19.Loosen and remove mounting bolt and nut. Take out the “C” pillar duct (RHS) rear panel. 20.The wheel arch duct (RHS), Floor duct (RHS) and “B” pillar duct (RHS) can be removed in the same manner as that of LHS. FITMENT For fitment follow the reverse procedure of removal. N. CONDENSER SEALING DUCT REMOVAL 1. Open the bonnet. 2. Remove upper cover. 3. Remove horns from both ends. 4. Loosen and remove mounting screws for both the sides. 5. Loosen and remove two cross pan head screws and take out the sealing duct assembly from the vehicle. FITMENT For fitment follow the reverse procedure of removal. NOTE Follow the tightening sequence given below:
RkJQdWJsaXNoZXIy MTIwNTUz