HVAC 61 REAR AC DUCTING REMOVAL 1. Loosen and remove the bottom mounting of front seat belt. (For Procedure refer front seat belt removal in cab section.) 2. Remove the “B” pillar trim LHS. (For procedure refer “B” pillar trim in body section.) 3. Pull out the front door and rear door garnish and then remove the “B“ pillar garnish by pulling it upwards. 4. Loosen and remove all mountings and take out the floor duct protection bracket. 5. Remove the Duct B-Pillar RH bottom. 6. Loosen and remove two mounting screws and pull out the “B” pillar duct (LHS) assembly. 7. Remove “C” pillar trim (LHS). (For procedure refer “C” pillar trim removal in Body section.) 8. Open the load floor assembly. Loosen and remove two mounting screws and pull out the scuff plate to release all tree clips. 9. Remove rear quarter trim from LHS and RHS. (For procedure refer rear quarter trim removal in Body section.)
RkJQdWJsaXNoZXIy MTIwNTUz