HVAC 51 23.7 ON VEHICLE REPAIRS A. CONTROL PANEL ASSEMBLY 1. Refer Central console removal procedure from body section for removal of the following components: a. Bottom bezel of cup holder. b. Centre utility bin c. cup holder 2. Loosen and remove the two screws. 3. Pull out the control panel to release the upper mounting snaps. 4. Slowly pull out the control panel and disconnect the two connectors. B. COMPRESSOR REMOVAL 1. Discharge the refrigerant using standard recovering equipment. Refer maintenance section. 2. Remove the AC Compressor belt; refer AC Compressor belt removal procedure. 3. Disconnect the Suction line and the discharge line. 4. Loosen and remove the mounting bolts and remove Compressor. FITMENT For fitment follow the reverse order of removal. Tighten the following fasteners to the recommended torque. i) Compressor mounting. ii) Refrigerant lines on compressor.
RkJQdWJsaXNoZXIy MTIwNTUz