BODY 67 3. Pull out the rear arch liner (Do not remove it completely) to have access to the third mounting on the inner end rear bumper loosen and remove the nut. 4. Loosen and remove three mounting nuts which are on the rear wheel arch mounting bracket. 5. Pullout out and remove the rear wheel arch cover to free all the tree clips and special screws. FITMENT For fitment follow reverse procedure of removal. NOTE Before assembly check the condition of plastic clips if found damaged replace with new one at the time of assembly. X. LOAD FLOOR REMOVAL 1. Open the load floor. 2. Disconnect the plastic from the load floor bracket. Follow the same procedure for other end also. 3. Remove the load floor assembly. FITMENT 1. Mount the plastic cap on the load floor bracket. 2. Insert the pivot pins on the load floor assembly. 3. Press this subassembly on to the load floor bracket.
RkJQdWJsaXNoZXIy MTIwNTUz