BODY 65 4. Carefully pull out the front wheel arch cover and separate it from the vehicle. FITMENT For fitment follow reverse procedure of removal. NOTE Properly locate the front wheel arch cover on the fender. U. VALANCE COVER REMOVAL 1. Remove front wheel arch cover. (For procedure refer front wheel arch cover removal process) 2. Loosen and remove the cross flanged screw at the front. 3. Loosen and remove mounting nuts (7 Nos.) from the inner side of the cab. 4. Pull out the valance cover carefully and separate it from the vehicle. FITMENT For fitment follow reverse procedure of removal. NOTE Before assembly check the condition of plastic clips if found damaged replace with new one at the time of assembly. V. REAR DOOR WHEEL CLADDING REMOVAL 1. Open the rear door. 2. Loosen and remove 02nos (M6) mounting screws of rear door cladding cover.
RkJQdWJsaXNoZXIy MTIwNTUz