BODY 37 7. Loosen the window winding mountings. 8. Remove electrical connection of window winding motor. 9. Remove two mounting bolts of winder (Motor) and loosen the third bolt. 10. Remove mounting nuts of winding mechanism which were loosened earlier. 11. Remove third mounting bolt and support the motor and remove the window winding mechanism along with motor. ASSEMBLY: For assembly follow the reverse procedure of removal. NOTE: While fitment fit the window winding motor first. VII. REAR DOOR REMOVAL: 1. Remove the “B” pillar trim. (For procedure refer “B” pillar trim removal process.) 2. Remove the AC duct from “B” pillar trim. 3. Pull out the wiring harness from the “B” pillar and disconnect the electrical connector. 4. Remove the door trim (For procedure refer Door trim removal section).
RkJQdWJsaXNoZXIy MTIwNTUz