BODY 16 NOTE Check the condition of the rubber grommet, if found damaged replace the same at the time fitment. III. HOOD LATCH ASSEMBLY REMOVAL 1. Disconnect the hood release cable from the hood latch assembly. (For procedure refer Bonnet latch release cable removal process.) 2. Loosen and remove three mounting bolts and lower the hood latch assembly and separate it from the vehicle. FITMENT For fitment follow the reverse procedure of removal. IV. HOOD LATCH (BONNET SIDE) REMOVAL 1. Open the bonnet. 2. Loosen and remove two mounting bolts and take out the hood latch from bonnet end. FITMENT For fitment follow the reverse procedure of removal. V. BONNET INSULATION: REMOVAL: 1. Open the bonnet. 2. Pull out the insulation from the bonnet assembly. FITMENT: For fitment follow reverse procedure of removal. NOTE: Check the condition of clips if found damaged replace the same with the new one.
RkJQdWJsaXNoZXIy MTIwNTUz