ELECTRICAL 303 inside the camera lens, which may further result into degradation of camera video feed on the screen. It is recommended that not to rely on camera video feed for parking assistance in such scenario. This phenomenon is temporary and will be automatically recovered with reduction in humidity and less variation in ambient temperature CLEANING CAMERA 1. Due to environmental reasons, dust, mud or fog may accumulate on the camera lens. So regularly clean the camera lens. 2. Use water to clean the camera lens. Do not use extreme cold extreme hot water. Rapid changes in temperature may brittle the camera lens. 3. Wipe the camera lens with soft cloth. 4. Do not use hard cloth or material to wipe the camera lens. This will cause scratches on the camera, and leads to deteriorated visual image on the display. 5. Do not apply organic solvent, car wax, window cleaner or glass coat to clean the camera. If this is applied, wipe it off as soon as possible. 6. Do not apply heavy force on lens, while cleaning. 7. Do not remove mud, snow on the camera lens using stick or hard material CONNECTOR DETAILS PINOUT DETAILS: PIN NO SIGNAL NAME SIGNAL DESCRIPTION 1 Ground Ground 2 Not Used Not Used 3 RVC_PWR Power to rear camera 4 RVc Video Sheild Rear View Camera Sheild 5 RVc Video GND Rear View Camera Video Ground (NTSC -) 6 RVc Video Sig Rear View Camera Video Signal (NTSC +) REMOVAL OF REAR VIEW CAMERA Notes and Cautions 1. During dismantle of camera from the vehicle, make sure that all the components removed during this process, shall be refitted back during assembly. No component is allowed it misfit or forget to fit. 2. Please follow respective components allowable pull in/pull out forces, shear forces etc., as per specifications. 3. Make sure that, during dismantling, remove electrical wiring harness connectors. And during assembly, make sure that all the electrical connectors are refitted as intended. 4. If camera is not fitted in specified tolerances as per the camera drawing, camera vision will differ than specified. Due to this customer may not see the intended rear view image in the display. This may cause malfunction of the camera. So please fit the camera within specified tolerances.
RkJQdWJsaXNoZXIy MTIwNTUz