ELECTRICAL 293 c. If the system is affected by any surrounding ultrasonic noise. If you see above screens, park assist is malfunctioning due to external conditions. Please rectify as specified on the screen. 13.Ultrasonic Park Assist System Limitations: Park Assist System only assists the driver by giving audible and visual alerts while reverse parking the vehicle. It is not a 100% collision avoiding system. It is completely driver’s responsibility to park the vehicle safely. Park Assist feature works using ultrasonic sound echo technology. Due to which Park Assist performance is not guaranteed in following scenarios a. If object have very sharp edge surface, where surface may divert echoes from sensor reception. b. If object is mesh fence made up of thin wires, where echoes can’t be given by the surface. c. Fast moving objects passes in the sensor field of detection, where echoes are not processed by the system. d. If object is made/covered by foam or sponge or snow where ultrasonic sound signals are absorbed. e. Sensors covered by mud or external material, by which ultrasonic signals are either not transmits or receives properly There might be blind spot in Park Assist field of detection close to the rear bumper, where object might have detected once in any of the zone, may miss from the sensor field of detection later. In this case, smaller objects like flower pots, kerb stones, pets or children may not be detected in Yellow or Red warning zones. It’s solely driver responsibility to park the vehicle safely. It is highly recommended to verify through rear/side mirrors of the surroundings before do the reverse parking. Due to any reason, If sensors come out side of bumper or lost its intended fitment position, please do the re fitment. 14.ULTRASONIC PARK ASSIST SYSTEM MAINTENANCE Regularly clean sensors located on the bumper. Use smooth cloth or material which can’t make any scratch on the sensor. Don’t apply heavy force while cleaning. 1. Don’t flush water on sensors with heavy pressure. This will damage sensor. 2. Don’t apply external colors, styling stickers, chewing gums, or any material which will stick on the sensors. This will degrade park assist performance. 3. Don’t put any spare tyre or foot rest or number plate which will cover sensor surface and obstruct its field of detection. 15.PARK DISTANCE CONTROLLER: LOCATION: It is located on Right hand side of CCB (Child Car Beam) of the vehicle as shown below. Reason for removal of Park Distance Controller 1. Controller Malfunction. Check the DTC for the reason of failure. 2. Mechanical damage of the controller.
RkJQdWJsaXNoZXIy MTIwNTUz