ENGINE 116 10. Disconnect the Turbocharger oil return tube by removing two mountings bolts from cylinder block. 11. Loosen and remove the banjo bolt of oil feeder line and disconnect the same from turbocharger and cylinder head. 12. Loosen and remove three mounting nuts and take out the turbocharger from exhaust manifold. Precautions for handling the turbocharger : • Do not lift the turbocharger by holding the actuator. • Do not lift turbocharger holding the rod end. • Do not lifting turbocharger holding the compressor side. • Hold the turbocharger at the turbine housing / center housing. • No foreign particles (dust/dirt) should enter the turbocharger. • Ensure the conditions of handling and installation of turbocharger/manifold are such that there is no risk of shocks, dropping the turbocharger or damage to the sealing surfaces (turbine housing inlet and outlet surfaces, compressor inlet and outlet, oil circuit), or damage to the actuator or flow adjusting rod and screw which might lead to the misalignment. • Handle the turbocharger carefully and ensure that it is not dropped.
RkJQdWJsaXNoZXIy MTIwNTUz