ELECTRICAL 208 3.3 FRONT WASHER WITH DRIP WIPES. 3.3.1 Description When front wash operation is activated, the wiper shall be operated by the BCM for a pre-configured number of times with the washer pump switched ON. Once the wash switch input is not present then the BCM shall perform the pre-configured number of wipes after wash and then after a pre-configured time the drip wipe shall occur i.e. wait for some time and one last wipe to clear water droplets (Drip wipe). 3.3.2 Conditional Requirements Activation – • IGN is ON & • Front Washer is activated Deactivation – • IGN is OFF or • Front Washer is deactivated or • Pre-configured wipes are provided On Fault – BCM logs respective DTC. 3.3.3 Operating Voltage Range DESCRIPTION REQUIREMENT VOLTAGE Front Washer With Drip Wipe. Normal operating voltage range 9V-16V 3.3.4 Operating Temperature Range DESCRIPTION REQUIREMENT VOLTAGE Front Washer With Drip Wipe. Operating temperature range -30c to +85c Storage temperature range: -40c to +105c 3.3.5 Inputs & Outputs
RkJQdWJsaXNoZXIy MTIwNTUz