ELECTRICAL 165 FUCTIONALITY DETAILS: 1. Manual Up mode Controller operates in manual up mode only when any power window switch is pressed in up position. Window will start moving in up direction while the Up switch kept pressed unless the window reaches its top end position. Controller stops window motor from moving in upward direction, if the up position switch is released by driver /co-driver/passenger before window reached its top end position. Any further window movement takes place only if driver /co-driver/passenger press the switch again. If window switch is pressed continuously in up position by driver /co-driver/passenger after window reached its top end position, then controller checks the locking current of window motor and if locking current is present then controller cut off the motor supply to protect the motor. If power window is at top end position & up position switch is again pressed by driver /co driver/passenger, then controller check the locking current of window motor for‘t’ sec and if locking current is present then it cut off the system supply. 2. Manual Down mode: Controller operates in manual down mode when any power window switch is pressed in down position. Window will start moving in downward direction while the Down switch is kept pressed unless it reached to its bottom end position. Controller stops window motor from moving in downward direction, if the down position switch is released by driver /co-driver/passenger before window reached its bottom end position. Any further window movement takes place only if driver /co-driver/passenger pressed the switch again in any position. If window switch is pressed continuously in down position by driver /co-driver/passenger after window reached its bottom end position, then controller checks the locking current of window motor and if locking current is present then controller cut off the motor supply to protect the motor. If power window is at bottom end position & down position switch is again pressed by driver /co-driver/passenger then controller check the locking current of window motor for ‘t’ sec and if locking current is present then it cut off the system supply. 3. Auto down mode: Controller operates in Auto down mode when power window switch is pressed momentarily in auto down position. Window will start moving in downward direction while it reaches the bottom end position. E.g. let driver press the power window switch in auto down position then window start movement in downward direction and it continuously moving in downward direction till it reached its bottom end position. Controller stops power window motor to operate in auto down mode, if switch is pressed again in manual up/manual down/auto down position by the driver /co-driver/passenger before window reached to its bottom end position. If driver want to move in up/down/auto down mode then driver should first release the position switch which is pressed for stopping the auto down mode and then press position switch again for further movement. E.g. Let driver press the power window switch in auto down position, then window start movement in downward direction if before reached its bottom end position driver press up/manual down/auto down position switch then controller will stop the window motor to operate in auto down mode. If driver want to move in up/down mode, then driver should first release the up/manual down/auto down position switch which is pressed for stopping the auto down mode and then press up/down position switch again for further movement. If power window is at bottom end position & auto down position switch is again pressed by driver /co driver/ passenger, then controller check the locking current of window motor for ‘t’ sec and if locking current is present then it cuts off the supply to motor.
RkJQdWJsaXNoZXIy MTIwNTUz