ENGINE 110 WARNING Do not suck air through tank pressure valve. Fuel Vapour inside the valve is harmful. FITMENT : 1. Fit the TPV in the clamp such that the open side (orange side) faces the rear of the vehicle. 2. Connect the vapour line to the Tank unit side (black side) and fix the clamp. CAUTION Do not kink/pinch or twist hose when they are routed. 3. Fix the TPV cap. S. Fuel Tank Purging Procedure : WARNING The purging may not remove all fuel vapours. Therefore any repair on fuel tank using external heat or flame may result in explosion causing personal injury or damage. 1. Remove fuel tank from the vehicle. Refer procedure as mentioned for fuel tank removal. 2. Remove all fuel lines from fuel tank. 3. Remove fuel pump and fuel level gauge from fuel tank. 4. Shift the tank to flushing area. 5. Fill tank with warm water or normal tap water and agitate rigorously and drain the water through drain plug. Repeat this procedure until inside of the tank is clean. 6. Replace the fuel tank if it is rusty from inside. 7. Completely flush out remaining water after washing. CAUTION Do not allow water to remain inside fuel tank after washing. This will cause corrosion inside fuel tank. Use shop cotton cloth for tank cleaning. Do not use cotton waste.
RkJQdWJsaXNoZXIy MTIwNTUz