ELECTRICAL 150 LOCATION The Drive Control Switch is mounted at the bottom most position of the center fascia. CONNECTOR DETAIL PINOUT DETAIL PIN NO. DESCRIPTION 1 BATT 2 NO CONNECTION 3 IGN SW 4 WK UP 5 GND 6 CAN L 7 NO CONNECTION 8 CAN H REMOVAL 1. Remove the bezel from IP. 2. Disengage the connector from Drive Control Switch. 3. Press the locked snaps on the bezel outwards and push the switch out from connector side. INSTALLATION 1. Insert the switch in Bezel cutout. 2. Connect the vehicle side connectors to the DCS. 3. Insert the Bezel on the center fascia
RkJQdWJsaXNoZXIy MTIwNTUz