ELECTRICAL 102 PINOUT DETAILS: WIPER STALK CONNECTOR LIGHT STALK CONNECTOR PIN NO DESCRIPTION PIN NO DESCRIPTION B1 GND A1 Low beam (Input to BCM) B2 Int. / Auto switch signal (To BCM) A2 Ground B3 Mist (To front wiper on/off relay) Blank B4 Int. / Auto switch signal (To BCM) A4 High beam (Input to BCM) B5 Fast (To slow / fast relay) A5 RH turn (To BCM) B6 Blank A6 LH turn (To BCM) B7 Front wash on A7 Turn feed signal (GND) B8 Blank A8 Ground B9 Rear Int. (To BCM Connector 4 pin no. 22) Blank B10 Rear wash on (To BCM Connector 2 pin no16) A10 Push on (Earth) B11 Rear wiper on (To BCM Connector 1 pin no. 41) A11 Push on (To pin number J1-07) B12 Earth A12 DIC switch-1 (To Inst. Cluster) B13 Int. (To C4 VR1 in RLS controller) A13 DIC switch-2 (To Inst. Cluster) B14 Int. (C8 VR2 sensor sensitivity to RLS controller) A14 Blank A15 Blank Blank
RkJQdWJsaXNoZXIy MTIwNTUz