ELECTRICAL 72 5. Remove the lamps. REFITMENT: 1. Fit the Lamp in the cut out on the Bumper. 2. Tighten the four mounting screws of lamp assembly. Tightening Torque for screws- 0.45 – 0.65 kgf-m 3. Connect the Electrical connections. 4. Fit the Rear Bumper. BULB SERVICEABLE PROCEDURE 1. Get access to lamp from bottom of vehicle. 2. Disconnect the Electrical connections of lamp. 3. Remove the Bulb assembly by rotating in anticlockwise direction. 4. Take out the bulb and replace with new one. 5. Fit the bulb assembly by rotating in clockwise direction. 6. Connect the electrical connection 8.4.14 SUNVISOR MIRROR LAMP Sunvisor mirror lamp is part of on sun visor assembly. Lamp is not separately serviceable. REMOVAL 1. Pry out the mirror and lamp assembly. 2. Disconnect the wiring harness. REFITMENT Follow the procedure of removal in reverse. 8.4.15 MOOD LAMP The mood lighting lamp is mounted in Door trim and Foot well trims at 6 location in vehicle. This Lamp is LED type. REMOVAL: 1. Pry out the Lamp assembly from the cutout provided on Door trim and Foot well trims. 2. Disconnect the electrical connection. 3. Take out the Lamp. REFITMENT: 1. Connect the electrical connection. 2. Fit the Lamp into the Cutout provided on the Door Trim and Foot well trim.
RkJQdWJsaXNoZXIy MTIwNTUz