ELECTRICAL 27 1.8 Fix Pulley Procedure: Component disassembly/check Tools required: Swivel mounted clamping support: 0 986 619 362 1. Clamp component in clamping support. 1 = Clamping support. G2. 4 = Compact generator. Caution: Take care not to damage or deform die cast aluminum housing. Damage or deformation may impair the accuracy of fit of the individual components and cause damage. Never use any objects to block the fan when assembling / disassembling the pulley. 2. Bent or defective fan blades will cause damage. 3. The component <Compact generator> of series Baseline is fitted with various pulleys: Pulley (without cover). Free wheel pulley (with cover). Note: Depending on the direction of rotation of the component < Alternator>, the component <Alternator rotor > and the pulley is provided with a right-hand or left-hand thread. < --- = Left-hand thread. --- > = Right-hand thread. Remove pulley: Tools required: 0 986 618 152 (Box spanner WAF 24), (KDLJ 6030). Multi-point attachment M10, long. 1. Position socket wrench (2) on nut of pulley (1). 2. Use the multi-point attachment (3) to stop the rotor shaft, unfasten the nut using a box wrench and detach the pulley. Remove freewheel pulley: Tools required: Assembly tool: 0 986 619 396. Multi-point socket 17*20. 1. Remove cover of freewheel pulley. 2. The cap is either clipped on or inserted. 3. Clipped-on cover can be removed using a suitable tool. 4. Fitted cover can only be removed by piercing and prising out.
RkJQdWJsaXNoZXIy MTIwNTUz