ENGINE 93 9. Extract the injector using injector removal tool (1) (Part no. 2868 5890 07 04). Remove the injector with the sealing washer. NOTE Injector should be tagged as soon as it is removed to avoid chances of it being interchanged. Since the I3C code of each injector is calibrated to the EMS, whenever an injector is replaced it I3C codes of the respective injectors should be fed in the EMS ECU using diagnostic tool Fitment : Follow the reverse order of removal for fitment. Do not reuse the bolt and washer removed in step 6, use new ones. Replace the injector sealing washer while refitting the injector. Vacuum clean the injectors. F. Timing Belt Removal : 1. Remove air filter outlet hose for easy accessibility. 2. Loosen and remove the front timing cover bolts and take out the front timing cover. 3. Remove the AC compressor belt and Power steering pump belt (stretch belt) (for procedure refer AC compressor belt removal procedure in this section).
RkJQdWJsaXNoZXIy MTIwNTUz