ELECTRONIC STABILITY PROGRAM (ESP) 2 B SPECIFICATIONS SYSTEM DESCRIPTION SPECIFICATIONS General System ESP 9.1 Type 4 channel, 4 wheel speed sensor integrated with Yaw rate sensor and Steering angle sensor. Hydraulic Control Unit (HCU) Type II split / X- Split, with integrated pressure sensor. Hydraulic control method 3 modes – Pressure Increase / Hold /Decrease. Type of pump Two piston pump Type of motor DC Electronic Control Unit (ECU) Operating voltage 10-16 V Operating temperature - 40° C to + 105° C Wheel Speed sensors Type Active hall effect Resistance High resistance > 3MΏ Air Gap (mm)* Front = 0.475 ~ 1.175 for 4x4 Operating temperature Rear = 0.375 ~ 0.875 - 40° C to + 115° C Supply Voltage 4.5V Steering Angle sensor Type Non Contact, Absolute Angle sensor Interface CAN Operating temperature - 400C to + 850C Yaw rate sensor Type Yaw rate, Lateral and Longitudinal Acceleration. Interface CAN Operating temperature - 400C to + 850C *NOTE Air gap cannot be measured in 4x2 vehicles.
RkJQdWJsaXNoZXIy MTIwNTUz