BRAKES 27 9. Pull out the brake holder clip and remove the front parking brake cable. INSPECTION : Check front and rear cable for any damage if so, replace the cable. Check other parts like plastic bushes; links etc. for damage and replace defective parts. Fitment : For fitment follow the reverse procedure of removal. NOTE : While assembly, ensure that there are no twists in the cables. Check for the rubber grommets for any damage and if needed replace with new one. After fitment adjust the parking brake. (For procedure refer parking brake adjustment in regular maintenance section) HAND BRAKE LEVER : Removal : 1. Remove the floor console (For procedure, refer floor console removal procedure in Body section.) 2. Disconnect the parking brake cable from the lever. (For procedure refer parking cable removal procedure in this section.) 3. Disconnect the electrical connection of hand brake switch. 4. Loosen and remove four mounting bolts and take out the hand lever assembly. Fitment : For fitment follow the reverse procedure of removal. NOTE : After fitment adjust the parking brake. (For procedure refer parking brake adjustment in regular maintenance section)
RkJQdWJsaXNoZXIy MTIwNTUz