BRAKES 22 5. Remove the caliper assembly along with the carrier from the brake disc. NOTE : If only the caliper housing has to be removed. Remove the caliper pads. (Refer caliper pad replacement in regular maintenance) Remove the upper sliding bolt and take out the caliper housing. (Lower sliding bolt is already taken out while removing the pads.) Fitment : For fitment follow the reverse procedure of removal. ii. BRAKE DISC : Front Brake Disc Removal : For front brake disc removal refer Front Axle section. Rear Brake Disc Removal : 1. Release the hand brake. 2. Check from rear back plate inspecting window if the brake shoe has completely retracted if not, retract the same using screw driver. 3. Position the vehicle on two post lift and remove the wheel. 4. Remove caliper assembly. (For procedure refer caliper removal process in this section.) 5. Loosen brake disc screws (2 Nos.) securing brake disc to the hub. 6. Pull off the brake disc. NOTE : If the disc does not come out easily, insert two screws in the holes provided on the disc. Tighten both the screws simultaneously to pull out the disc.
RkJQdWJsaXNoZXIy MTIwNTUz