PROPELLER SHAFT 1 10.1 GENERAL INFORMATION A. ADJUSTMENT / REPAIR DATA SR. NO DESCRIPTION VALUES 01 Maximum permissible displacement in lateral axial direction under load of 3.3 kgm. 0.15 mm. 02 Maximum permissible radial looseness between the slip yoke & tube shaft. 0.18 mm. 03 Maximum Permissible dynamic unbalance at gear box end and axle end at 4000 rpm. 36 gm cm. 04 Maximum Permissible dynamic unbalance at center bearing location at 4000 rpm. 27 gm cm 05 Total Indicator Reading of Maximum. 0.25 mm 06 Run out to be measured within 12.7 mm of tube length centre and within 80 mm of tube-weld location at both ends. 0.76 mm 07 Grease splines at the intervals. 15,000 km 08 Grease type. HPCL/CASTROL Castrol AP-2, Multipurpose Grease-2 Quantity: As required
RkJQdWJsaXNoZXIy MTIwNTUz