CLUTCH 9 C. ASSEMBLY PROCEDURE: Align the clutch set with DMF ensuring the proper fitment direction of clutch disk. Centre the pressure plate Assembly on the DMF through three dowel pins & Align the clutch set with the help of mandrel (5412 5890 2501) & mount the 3 alternate bolts. Assemble the three rods “A”, put the clutch locking tool “B” & tighten the nuts “C” in the upper end of Clutch alignment locking tool on the on the clutch assembly. Rotate bar “V” in clockwise direction till pin “D” touches the collar “E”. This ensures complete disengagement of clutch. Assemble the 3 bolts. Rotate the bar “V” in anti-clockwise direction to engage the clutch and remove the tool. Assemble the remaining 3 bolts & tighten all 6 bolts to 25Nm torque in cross direction. Remove the Strap. Remove the flywheel locking tool. Remove transaxle (Refer transaxle removal procedure).
RkJQdWJsaXNoZXIy MTIwNTUz