BODY 27 18. REAR DOOR TRIM REMOVAL 1. Open the Door. 2. Remove mounting screw on switch bezel rear. 3. Disconnect electrical connection on switch & pull out switch bezel with switch. 4. Disconnect the window winding connection and remove the switch. 5. Pull out the door corner trims. 6. Remove the mounting screw of door corner. 7. Insert plastic wedge pin and remove the door trim. NOTE While lifting door trim, care should be taken such that tree clips don’t get damage. Below image gives the location of tree clips on door trim. FITMENT For fitment follow the reverse procedure of removal. NOTE “For Side door Rattling Noise, Door Latch and striker setting need to be done & maintain 1 mm under flush condition.”
RkJQdWJsaXNoZXIy MTIwNTUz