BODY 20 10. REAR BUMPER REMOVAL 1. Open the tail gate. 2. Remove the 2 Nos. of Mounting screws M8 special screw. 3. Remove rear Lamp (For procedure refer Rear Lamp removal process in Electrical section.) 4. Loosen and remove the bumper clip below rear lamp LH \ RH side. 5. Loosen and remove all rear bumper six clip which hold the rear bumper from bottom side. 6. Loosen and remove screws which are inside the wheel arch LH & RH. 7. Take care that the tailgate seal is removed for easy removal of bumper. 8. Pull out the bumper edges from the wheel arch. 9. Take care that the hood seal is removed for easy removal of bumper. 10.Disconnect the electrical connections. FITMENT For fitment follow the reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz